The TETRA handset FT5 S combines all features of a modern digital radio handset with personal emergency signal functions according to the guidelines of the employers' liability insurance associations for dangerous individual workstations.
All TETRA functions known from the FT4 series compliant with the ETSI standard are available, as are state-of-the-art technologies such as Smart Ready Bluetooth for audio connection and localisation, a 4-way satellite receiver and outstanding TETRA transmission performance for optimum radio connections. The FT5 S has a ruggedised, dustproof and waterproof housing (IP65), is smaller, lighter and handier than most TETRA handsets on the market, making it the ultimate portable and comfortable handset.
This mobile device was developed for the special requirements of personal security. As a high-quality TETRA personal emergency signal device, the Security variant FT5 S features separate, easily accessible emergency call buttons for manual alarm triggering as well as powerful sensors for automatic alerting in hazardous situations. Integrated localisation modules determine the alarm location in indoor and outdoor areas with floor and room accuracy. Persons working in hazardous environments or at individual workstations can thus be automatically contacted and located at any time in the event of a hazardous situation.
In combination with the funktel Secury system, the FT5 S meets the strict requirements of statutory accident insurance and is certified in accordance with the requirements of DGUV regulation 112-139, based on the standard DIN V VDE V 0825-1 (11).
Features
- Certification for hazardous lone worker environments
- DIN VDE V 0825-1, DGUV 112-139
- Integrated personal emergency signal functions
- large, red emergency call button
- 4 manual alarms (deliberate)
- 4 automatic alarm types (will-independent)
- 3 separate positioning technologies (induction - GNSS - Bluetooth)
- Inductive location receiver for room- and floor-accurate localisation
- Contactless guard control function
- Cyclic life check with automatic transmission of technical alarms
- Sensor and localisation test on registration
- Automatic or manual logon and logoff at the alarm centre
- 4-way GNSS satellite receiver
- GPS, GLONASS, Galileo, BeiDou
- Integrated Bluetooth module
- BT 4.0 (LE) Smart Ready ( backward compatible)
- Audio connection and beacon location
- Integrated inductive localisation module
- Highly accurate interior localisation
- Robust, impact-resistant housing
- Water and dust proof (IP65)
- Edge rubber coating for shock absorption
- Micro-SD and Micro-SIM card slot
- For securing individual alarm and device parameters
- For end-to-end encryption (on request)
- Authentication and air interface encryption Class 2 & 3
- Messaging and alarm display
- Optical (2.2" TFT display with brightness sensor)
- Acoustic
- 3 W High Power Transmit power
- Extra bright 2.2" TFT display with brightness sensor
- Additional audio connection
- For wired audio accessories
- Subscriber list (phone book)
- With up to 1000 entries, can be updated centrally via phonebook-updater
- Group list with folder structure for up to 1000 groups
Accessories
Battery
Multi Desktop Station
Clip
Desktop Station
Carry Case
Specifications
General information
- Radio standard: TETRA (Trans European Trunked Radio) according to ETSI
- Protection class: IP65 (to IEC 60529, jet-proof & dust-tight)
- Dimensions: 138 x 55 x 27 mm (with standard battery)
- Weight: 189 g (without battery) / 245 g (standard battery) / 283 g (extended battery)
- Temperature ranges: Operation: -20... +55 °C, Storage: -30... +75 °C (without battery)
- Operating time (5/5/90):
- 22 h, with extended battery, incl. GNSS (up to 31 h stand-by)
- 12 h, with standard battery, incl. GNSS (up to 21 h stand-by)
Security
- Certification: DIN VDE V 0825-1 and -11, DGUV 112-139 (previously BGR 139), for use at hazardous and single workplaces(1)
- Will-dependent alarms: pressure alarm (level 1+2), warning alarm (level 1+2), (manual triggering) each configurable: active/inactive
- Will-independent alarms: position, idle, time, loss alarm, (fully automatic triggering) each configurable: active/inactive, trigger and pre-alarm times and trigger angle (for position alarm, default: 55° +/- 5%)
- Guard control function: contactless / integrated1, for protection and monitoring of guard rounds
- "Secury L" function: personal alarms to defined TETRA addresses with rough location (GNSS), without IOS location and without control center.
Positioning / Localization
- Satellite positioning (GNSS): Receiver for GPS, GLONASS, Galileo and BeiDou satellite systems, for optimized outdoor positioning, according to ETSI LIP protocol
- Sensitivity: -156 dBm (hot start) / -160 dBm (reacquisition)
- Accuracy: 5 m (at 50% probability), 10 m (at 95% probability)
- IOS receiver for the funktel IOS (inductive localisation transmitter) for localisation
- Bluetooth (BT): BT module (4.0/LE) for rough location(2) (via BT beacons)
Operational controls
- Display type: 2.2" TFT color display, high resolution, resolution: 240 x 320 pixels, 262,000 colors, support for multinational character sets
- Keyboard: illuminated alphanumeric keyboard with navigation block and two selection keys for easy menu navigation with fast access
- Function elements: special lateral button, individually assignable (e.g. warning alarm)
- Large PTT button, large, easily accessible emergency call button
- Two-level rotary knob (volume + group selection)
HF characteristics
- Frequency band: 380-430 MHz (other frequency bands on request)
- Channel / duplex spacing: 25 kHz / 10 MHz (others on request)
- Transmission power: 3 W (power class 3), adjustable in 4 steps of 5 dB
- Emission class: 18KO G7WDT
- Recipient class: A&B
- Sensitivity: -111 dBm (according to ETSI EN 302561 V2.1.1)
1) in combination with funktel Secury-System 2) components available, function integration is about to be completed